Massey Ferguson MF 4215 (A) vs New Holland TN 55 D/S (A)

11 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4215 (A) and the TN 55 D/S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4215 (A) and New Holland TN 55 D/S (A), field by field
Field	MF 4215 (A)	TN 55 D/S (A)	Gap
Engine
Engine power, claimed claimed	51.4 hp	49.3 hp	—
Engine declared	Perkins 903.27	IVECO 8035.05 B	differs
Displacement declared	2.70 L	2.93 L	+9% TN 55 D/S (A)
Maximum torque declared	136 lb·ft · 184 N·m	136 lb·ft · 185 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	12.5 gpm · 47.4 L/min	—
Pressure declared	2,031 psi · 140 bar	2,466 psi · 170 bar	+21% TN 55 D/S (A)
Three-point lift at ends declared	4,718 lb · 2,140 kg	5,886 lb · 2,670 kg	+25% TN 55 D/S (A)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,258 lb · 2,385 kg	6,636 lb · 3,010 kg	+26% TN 55 D/S (A)
Maximum permissible mass declared	—	8,818 lb · 4,000 kg	—
Wheelbase declared	83.9 in · 2,130 mm	83.9 in · 2,130 mm	—
Length declared	149.0 in · 3,785 mm	156.7 in · 3,980 mm	—
Width declared	78.0 in · 1,982 mm	70.6 in · 1,794 mm	+10% MF 4215 (A)
Height declared	99.0 in · 2,515 mm	90.9 in · 2,310 mm	+9% MF 4215 (A)
Ground clearance declared	8.3 in · 210 mm	13.0 in · 330 mm	+57% TN 55 D/S (A)
Turning radius, braked declared	—	10.3 ft · 3.15 m	—
Fuel tank declared	90.9 qt · 86.0 L	78.0 qt · 73.8 L	+17% MF 4215 (A)

Source

Source