MAN Werk München 4P1 or UZINA TRACTORUL 420 (DT)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for MAN Werk München 4P1 and UZINA TRACTORUL 420 (DT), with the call on each
Question4P1420 (DT)Call
Which puts more power through the PTO shaft?25.7 kW (35 hp)Traktorenlexikon, “MAN 4P1”26.0 kW (34.9 hp)Traktorenlexikon, “UTB 420 (DT)”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 4P1 and the 420 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 4P1 and the 420 (DT).
Which pumps more oil for implements?—16.0 L/min (4.2 gpm)Traktorenlexikon, “UTB 420 (DT)”No figureNo call on hydraulic flow: no figure on record for the 4P1.
Which lifts more on the three-point hitch?1,200 kg (2,646 lb)Traktorenlexikon, “MAN 4P1”—No figureNo call on three-point lift: no figure on record for the 420 (DT).
Which is heavier, for traction?1,920 kg (4,233 lb)Traktorenlexikon, “MAN 4P1”1,640 kg (3,616 lb)Traktorenlexikon, “UTB 420 (DT)”Ahead (a fact, not an advantage)The MAN Werk München 4P1 is 17% heavier (280 kg / 617 lb) than the UZINA TRACTORUL 420 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,800 kg (6,173 lb)Traktorenlexikon, “MAN 4P1”—No figureNo call on maximum permissible mass: no figure on record for the 420 (DT).
Which has the wider choice of gears?8Traktorenlexikon, “MAN 4P1”6 to 9Traktorenlexikon, “UTB 420 (DT)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “MAN 4P1”—No figureNo call on a creeper range: not stated for the 420 (DT).
Which is faster on the road?19.9 km/h (12.4 mph) to 28.3 km/h (17.6 mph)Traktorenlexikon, “MAN 4P1”25 km/h (15.5 mph)Traktorenlexikon, “UTB 420 (DT)”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1520Traktorenlexikon, “MAN 4P1”540 rpmTraktorenlexikon, “UTB 420 (DT)”No figureNo call on PTO speeds: no standard PTO speed stated for the 4P1.
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “UTB 420 (DT)”No figureNo call on PTO independence: not stated for the 4P1.
Which drives on both axles?4WDTraktorenlexikon, “MAN 4P1”Two-wheel or four-wheel driveTraktorenlexikon, “UTB 420 (DT)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1960–19631974–1981Ahead (a fact, not an advantage)The UZINA TRACTORUL 420 (DT) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The MAN Werk München 4P1 is 17% heavier (280 kg / 617 lb) than the UZINA TRACTORUL 420 (DT) (both unladen weight, as stated by the source).
  • The UZINA TRACTORUL 420 (DT) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources