7 material differences · fewer than 12

Tractor oneMAN 2N11961–1962No measured PTO figureTractor twoURSUS C-3281963–1968No measured PTO figure

Which should you choose?

Read our verdict on the 2N1 and the C-328 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 5 fields identical or within 5%, which is not counted as material

MAN 2N1 and URSUS C-328, field by field
Field	2N1	C-328	Gap
Engine
Engine power, claimed claimed	27.5 hp	27.6 hp	—
Engine declared	MAN D 9422 M 2	URSUS S-312 B	differs
Displacement declared	1.66 L	1.96 L	+18% C-328
Maximum torque declared	—	74 lb·ft · 100 N·m	—
Transmission
Top speed declared	11.8 mph · 19 km/h	14.3 mph · 23 km/h	+21% C-328
Clutch declared	Single plate dry clutch	—	—
Hydraulics & hitch
Pump flow declared	—	4.8 gpm · 18.0 L/min	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,527 lb · 1,600 kg	3,646 lb · 1,654 kg	—
Wheelbase declared	73.5 in · 1,868 mm	72.8 in · 1,850 mm	—
Length declared	122.4 in · 3,110 mm	119.3 in · 3,030 mm	—
Width declared	62.2 in · 1,580 mm	66.1 in · 1,680 mm	+6% C-328
Ground clearance declared	15.7 in · 400 mm	15.7 in · 400 mm	—
Turning radius, braked declared	9.5 ft · 2.90 m	8.8 ft · 2.69 m	+8% 2N1
Fuel tank declared	44.4 qt · 42 L	37.0 qt · 35.0 L	+20% 2N1

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

MAN 2N1 sources

Source

Source: Traktorenlexikon, “MAN 2N1”
Source: Traktorenlexikon, “MAN 4N2”

URSUS C-328 sources