6 material differences · fewer than 12
Tractor oneLanz D 90061943–1945No measured PTO figureTractor twoSOMECA DA-501952–1955No measured PTO figure
Which should you choose?
Read our verdict on the D 9006 and the DA-50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 9006 | DA-50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 40.5 hp | — |
| Engine declared | — | O.M.-MILANO COD-40 | — |
| Displacement declared | — | 3.77 L | — |
| Maximum torque declared | — | 137 lb·ft · 186 N·m | — |
| Transmission | |||
| Top speed declared | 11.6 mph · 18.6 km/h | 13.7 mph · 22 km/h | +18% DA-50 |
| Hydraulics & hitch | |||
| Pump flow declared | — | 2.4 gpm · 9.2 L/min | — |
| Rear PTO speeds declared | 630 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,716 lb · 3,500 kg | 4,586 lb · 2,080 kg | +68% D 9006 |
| Wheelbase declared | 77.8 in · 1,977 mm | 75.0 in · 1,905 mm | — |
| Length declared | 151.8 in · 3,855 mm | 116.5 in · 2,960 mm | +30% D 9006 |
| Width declared | 70.6 in · 1,792 mm | 70.1–89.0 in · 1,780–2,260 mm | differs |
| Ground clearance declared | 11.8 in · 300 mm | 15.7 in · 400 mm | +33% DA-50 |
| Fuel tank declared | — | 59.2 qt · 56.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lanz D 9006 sources
- Source: Traktorenlexikon, “Lanz D 9006 Reingas”
SOMECA DA-50 sources
- Source: Traktorenlexikon, “Someca DA 50”