11 material differences · fewer than 12
Tractor oneLandini TL 33 N/A (R 5530 F)1983–1987No measured PTO figureTractor twoVALMET 205/205-41989–1991No measured PTO figure
Which should you choose?
Read our verdict on the TL 33 N/A (R 5530 F) and the 205/205-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | TL 33 N/A (R 5530 F) | 205/205-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 48 hp | — |
| Engine declared | Perkins AD 3.152 S | VALMET D-27 D 2 | differs |
| Displacement declared | 2.50 L | 2.69 L | +7% 205/205-4 |
| Maximum torque declared | 130 lb·ft · 176 N·m | 129 lb·ft · 175 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry Luk double clutch | Pedal operated dry Fichtel & Sachs single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.8 gpm · 37.1 L/min | 10.3 gpm · 39.0 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,200 lb · 1,905 kg | 5,975 lb · 2,710 kg | +42% 205/205-4 |
| Wheelbase declared | 77.0 in · 1,955 mm | 83.1 in · 2,112 mm | +8% 205/205-4 |
| Length declared | 131.1 in · 3,330 mm | 146.1 in · 3,710 mm | +11% 205/205-4 |
| Width declared | 52.3–73.7 in · 1,328–1,873 mm | 76.8–97.2 in · 1,950–2,470 mm | differs |
| Ground clearance declared | 12.7 in · 323 mm | 17.3 in · 440 mm | +36% 205/205-4 |
| Turning radius, braked declared | 10.3 ft · 3.15 m | 11.8 ft · 3.60 m | +14% 205/205-4 |
| Fuel tank declared | 56.0 qt · 53.0 L | 77.1 qt · 73.0 L | +38% 205/205-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini TL 33 N/A (R 5530 F) sources
- Source: Traktorenlexikon, “Landini TL 33 NA”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”
VALMET 205/205-4 sources
- Source: Traktorenlexikon, “Valmet 205”