9 material differences · fewer than 12
Tractor oneLandini 6560 L (DT) TL 37 N/M (TL-37 DT/M)1988–2000No measured PTO figureTractor twoMassey Ferguson MF 365 (A)1988–1997No measured PTO figure
Which should you choose?
Read our verdict on the 6560 L (DT) TL 37 N/M (TL-37 DT/M) and the MF 365 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6560 L (DT) TL 37 N/M (TL-37 DT/M) | MF 365 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64 hp | — |
| Engine declared | Perkins A 4.236 | Perkins A 4.236 | — |
| Displacement declared | 3.87 L | 3.87 L | — |
| Maximum torque declared | 181 lb·ft · 245 N·m | 181 lb·ft · 246 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry and air-cooled OMG double clutch | Dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.2 gpm · 42.3 L/min | — | — |
| Pressure declared | 2,756 psi · 190 bar | 2,466 psi · 170 bar | +12% 6560 L (DT) TL 37 N/M (TL-37 DT/M) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,004 lb · 2,270 kg | 5,712 lb · 2,591 kg | +14% MF 365 (A) |
| Wheelbase declared | 81.5 in · 2,070 mm | 90.0 in · 2,286 mm | +10% MF 365 (A) |
| Length declared | 140.6 in · 3,570 mm | 149.6 in · 3,800 mm | +6% MF 365 (A) |
| Width declared | 65.7–87.4 in · 1,670–2,220 mm | 72.8 in · 1,850 mm | differs |
| Ground clearance declared | 16.5 in · 420 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.29 m | — | — |
| Fuel tank declared | 65.5 qt · 62.0 L | 114.1 qt · 108.0 L | +74% MF 365 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 6560 L (DT) TL 37 N/M (TL-37 DT/M) sources
- Source: Traktorenlexikon, “Landini R 6560 L (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
Massey Ferguson MF 365 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 365”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”