Landini 105 DT or Renault Temis 550?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Temis 550 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 105 DT suits road haulage better on this data: 70% (4,300 kg / 9,480 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 105 DT and Renault Temis 550, with the call on each
Question105 DTTemis 550Call
Which puts more power through the PTO shaft?75.8 kW (101.6 hp)Traktorenlexikon, “Landini Legend 105”75.1 kW (100.7 hp)Traktorenlexikon, “Renault Témis 550X”Not comparableNot comparable on power at the PTO shaft: the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Temis 550 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 105 DT and the Temis 550.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 105 DT and the Temis 550.
Which pumps more oil for implements?61.5 L/min (16.2 gpm)Traktorenlexikon, “Landini Legend 105”55.7 L/min (14.7 gpm)Traktorenlexikon, “Renault Témis 550X”AheadThe Landini 105 DT has 10% more hydraulic flow (5.8 L/min / 1.5 gpm) than the Renault Temis 550 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Landini Legend 105”7,260 kg (16,006 lb)Traktorenlexikon, “Renault Témis 550X”AheadThe Renault Temis 550 has 12% more lift (760 kg / 1,676 lb) than the Landini 105 DT (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,410 kg (11,927 lb)Traktorenlexikon, “Landini Legend 105”5,340 kg (11,773 lb)Traktorenlexikon, “Renault Témis 550X”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?10,400 kg (22,928 lb)Traktorenlexikon, “Landini Legend 105”6,100 kg (13,448 lb)Traktorenlexikon, “Renault Témis 550X”AheadThe Landini 105 DT has 70% higher maximum permissible mass (4,300 kg / 9,480 lb) than the Renault Temis 550 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?36Traktorenlexikon, “Landini Legend 105”16 to 24Traktorenlexikon, “Renault Témis 550X”AheadThe Landini 105 DT has 50% more forward gears (12 gears) than the Renault Temis 550 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 105 DT and the Temis 550.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Landini Legend 105”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Témis 550X”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini Legend 105”540/1000 rpmTraktorenlexikon, “Renault Témis 550X”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini Legend 105”No figureNo call on PTO independence: not stated for the Temis 550.
Which drives on both axles?4WDTraktorenlexikon, “Landini Legend 105”4WDTraktorenlexikon, “Renault Témis 550X”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20012000–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 105 DT has 10% more hydraulic flow (5.8 L/min / 1.5 gpm) than the Renault Temis 550 (both pump flow, as stated by the source).
  • The Renault Temis 550 has 12% more lift (760 kg / 1,676 lb) than the Landini 105 DT (both lift at the hitch ends, as stated by the source).
  • The Landini 105 DT has 70% higher maximum permissible mass (4,300 kg / 9,480 lb) than the Renault Temis 550 (both maximum permissible mass, as stated by the source).
  • The Landini 105 DT has 50% more forward gears (12 gears) than the Renault Temis 550 (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Temis 550 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources