13 material differences

Tractor oneLandini 105 DT1997–2001No measured PTO figureTractor twoRenault Temis 5502000–2003No measured PTO figure

Which should you choose?

Read our verdict on the 105 DT and the Temis 550 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 4 fields identical or within 5%, which is not counted as material

Landini 105 DT and Renault Temis 550, field by field
Field105 DTTemis 550Gap
Engine
Engine power, claimed claimed101.6 hp100.7 hp—
Engine declaredPerkins 1006.6 HR-4JOHN DEERE 4045 TRTdiffers
Displacement declared5.99 L4.53 L+32% 105 DT
Maximum torque declared291 lb·ft · 395 N·m299 lb·ft · 405 N·m—
Transmission
Top speed declared24.9 mph · 40 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredpedal-operated dry single-disc clutch, configured as a driving clutchDry LuK double clutch type 310/310differs
Hydraulics & hitch
Pump flow declared16.2 gpm · 61.5 L/min14.7 gpm · 55.7 L/min+10% 105 DT
Pressure declared2,901 psi · 200 bar——
Three-point lift, at the coupling points declared14,330 lb · 6,500 kg16,006 lb · 7,260 kg+12% Temis 550
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared11,927 lb · 5,410 kg11,773 lb · 5,340 kg—
Maximum permissible mass declared22,928 lb · 10,400 kg13,448 lb · 6,100 kg+70% 105 DT
Wheelbase declared110.2 in · 2,800 mm97.6 in · 2,480 mm+13% 105 DT
Length declared188.2 in · 4,780 mm199.8 in · 5,074 mm+6% Temis 550
Width declared92.1 in · 2,340 mm70.9–100.4 in · 1,800–2,550 mmdiffers
Ground clearance declared21.3 in · 540 mm19.3 in · 490 mm+10% 105 DT
Turning radius, braked declared19.2 ft · 5.85 m13.3 ft · 4.05 m+44% 105 DT
Fuel tank declared190.2 qt · 180 L162.7 qt · 154.0 L+17% 105 DT

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Landini 105 DT sources

Source
  • Source: Traktorenlexikon, “Landini Legend 105”
  • Source: Traktorenlexikon, “Massey Ferguson MF 4260”

Renault Temis 550 sources

Source
  • Source: Traktorenlexikon, “Renault Témis 550X”