Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) vs Massey Ferguson MF 1014 (A)

12 material differences

Tractor one

1987–2000

No measured PTO figure

Tractor two

1978–1990

No measured PTO figure

Which should you choose?

Read our verdict on the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the MF 1014 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) and Massey Ferguson MF 1014 (A), field by field
Field	R-9880 (DT) TL-45 N/A (TL-45 DT/A)	MF 1014 (A)	Gap
Engine
Engine power, claimed claimed	91.7 hp	91 hp	—
Engine declared	Perkins TL 4.236	Perkins A 6.354-4	differs
Displacement declared	3.86 L	5.80 L	+50% MF 1014 (A)
Maximum torque declared	255 lb·ft · 346 N·m	295 lb·ft · 400 N·m	+16% MF 1014 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry and air-cooled double clutch	—
Hydraulics & hitch
Pump flow declared	11.5 gpm · 43.7 L/min	14.0 gpm · 53.0 L/min	+21% MF 1014 (A)
Pressure declared	—	1,697 psi · 117 bar	—
Three-point lift at ends declared	7,893 lb · 3,580 kg	—	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,893 lb · 3,580 kg	9,976 lb · 4,525 kg	+26% MF 1014 (A)
Wheelbase declared	97.0 in · 2,463 mm	104.7 in · 2,660 mm	+8% MF 1014 (A)
Length declared	155.5 in · 3,950 mm	168.9 in · 4,290 mm	+9% MF 1014 (A)
Width declared	80.3 in · 2,040 mm	85.0 in · 2,160 mm	+6% MF 1014 (A)
Height declared	107.3 in · 2,725 mm	111.4 in · 2,830 mm	—
Ground clearance declared	18.1 in · 460 mm	15.2–19.7 in · 385–500 mm	differs
Turning radius, braked declared	12.8 ft · 3.89 m	—	—
Fuel tank declared	107.8 qt · 102.0 L	179.6 qt · 170.0 L	+67% MF 1014 (A)

Source

Source