Landini 8830 (DT) TL-23 N/E (TL-23 DT/F) vs VALMET 4600

10 material differences · fewer than 12

Tractor one

1983–1987

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 8830 (DT) TL-23 N/E (TL-23 DT/F) and the 4600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Landini 8830 (DT) TL-23 N/E (TL-23 DT/F) and VALMET 4600, field by field
Field	8830 (DT) TL-23 N/E (TL-23 DT/F)	4600	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	Perkins A 4.248	VALMET 420 D	differs
Displacement declared	4.07 L	4.40 L	+8% 4600
Maximum torque declared	208 lb·ft · 282 N·m	214 lb·ft · 290 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry and air-cooled OMG double clutch	Dry double clutch	differs
Hydraulics & hitch
Pump flow declared	9.3 gpm · 35.3 L/min	10.3 gpm · 39.0 L/min	+10% 4600
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,614 lb · 3,000 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	6,945 lb · 3,150 kg	+12% 4600
Wheelbase declared	90.6 in · 2,300 mm	94.0 in · 2,387 mm	—
Length declared	151.6 in · 3,850 mm	149.2 in · 3,790 mm	—
Width declared	76.8 in · 1,950 mm	81.5 in · 2,070 mm	+6% 4600
Height declared	94.7 in · 2,405 mm	95.1 in · 2,415 mm	—
Ground clearance declared	22.0 in · 560 mm	17.1 in · 435 mm	+29% 8830 (DT) TL-23 N/E (TL-23 DT/F)
Turning radius, braked declared	13.0 ft · 3.95 m	14.8 ft · 4.50 m	+14% 4600
Fuel tank declared	63.9 qt · 60.5 L	100.4 qt · 95.0 L	+57% 4600

Source

Source