9 material differences · fewer than 12
Tractor oneLandini R 8000 Special (TL-15 N)1967–1974No measured PTO figureTractor twoUTB U-640 (DTC)1982–1985No measured PTO figure
Which should you choose?
Read our verdict on the R 8000 Special (TL-15 N) and the U-640 (DTC) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | R 8000 Special (TL-15 N) | U-640 (DTC) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.2 hp | 63.2 hp | — |
| Engine declared | Perkins A 4.212 | UTB D-121.050 | differs |
| Displacement declared | 3.47 L | 3.60 L | — |
| Maximum torque declared | 166 lb·ft · 226 N·m | 158 lb·ft · 214 N·m | +6% R 8000 Special (TL-15 N) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.9 mph · 24 km/h | +25% R 8000 Special (TL-15 N) |
| Hydraulics & hitch | |||
| Pump flow declared | 7.3 gpm · 27.8 L/min | 5.7 gpm · 21.6 L/min | +29% R 8000 Special (TL-15 N) |
| Pressure declared | — | 2,973 psi · 205 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,600 lb · 2,540 kg | 4,453 lb · 2,020 kg | +26% R 8000 Special (TL-15 N) |
| Wheelbase declared | 85.4 in · 2,170 mm | 83.1 in · 2,110 mm | — |
| Length declared | 143.3 in · 3,640 mm | 137.0 in · 3,480 mm | — |
| Width declared | 72.8–92.5 in · 1,850–2,350 mm | 70.1 in · 1,780 mm | differs |
| Ground clearance declared | 17.3 in · 440 mm | 18.5 in · 470 mm | +7% U-640 (DTC) |
| Turning radius, braked declared | 12.3 ft · 3.76 m | 11.5 ft · 3.50 m | +7% R 8000 Special (TL-15 N) |
| Fuel tank declared | 90.9 qt · 86.0 L | 57.1 qt · 54.0 L | +59% R 8000 Special (TL-15 N) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R 8000 Special (TL-15 N) sources
- Source: Traktorenlexikon, “Landini 8000 Special”
- Source: Traktorenlexikon, “Massey Ferguson MF 165 S”
UTB U-640 (DTC) sources
- Source: Traktorenlexikon, “UTB U 640”