Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) vs VALMET 6000-4

16 material differences

Tractor one

1988–2000

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 1 fields identical or within 5%, which is not counted as material

Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) and VALMET 6000-4, field by field
Field	R-7860 (DT) TL-20 N/M (TL-20 DT/M)	6000-4	Gap
Engine
Engine power, claimed claimed	70.0 hp	74.0 hp	+6% 6000-4
Engine declared	Perkins LD 4.236	VALMET 420 D	differs
Displacement declared	3.87 L	4.40 L	+14% 6000-4
Maximum torque declared	195 lb·ft · 264 N·m	182 lb·ft · 247 N·m	+7% R-7860 (DT) TL-20 N/M (TL-20 DT/M)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry and air-cooled OMG double clutch	dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	9.8 gpm · 37.2 L/min	21.2 gpm · 80.3 L/min	+116% 6000-4
Pressure declared	2,756 psi · 190 bar	2,901 psi · 200 bar	+5% 6000-4
Three-point lift at ends declared	4,698 lb · 2,131 kg	9,601 lb · 4,355 kg	+104% 6000-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,305 lb · 2,860 kg	9,193 lb · 4,170 kg	+46% 6000-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	89.8 in · 2,281 mm	99.6 in · 2,530 mm	+11% 6000-4
Length declared	146.1 in · 3,710 mm	175.2 in · 4,450 mm	+20% 6000-4
Width declared	78.3 in · 1,990 mm	85.2 in · 2,165 mm	+9% 6000-4
Height declared	94.3 in · 2,395 mm	105.9 in · 2,690 mm	+12% 6000-4
Ground clearance declared	20.3 in · 515 mm	16.9 in · 430 mm	+20% R-7860 (DT) TL-20 N/M (TL-20 DT/M)
Turning radius, braked declared	13.0 ft · 3.96 m	15.3 ft · 4.65 m	+17% 6000-4
Fuel tank declared	90.9 qt · 86.0 L	167.0 qt · 158.0 L	+84% 6000-4

Source

Source