Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) or ZETOR 7711/7745?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7830 (DT) TL-20 N/F (TL-20 DT/F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7711/7745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) suits loader and hydraulic implement work better on this data: 25% (603 kg / 1,329 lb) more three-point lift.
  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) and ZETOR 7711/7745, with the call on each
Question7830 (DT) TL-20 N/F (TL-20 DT/F)7711/7745Call
Which puts more power through the PTO shaft?53 kW (71 hp)Traktorenlexikon, “Landini 7830 (DT)”53.7 kW (72.0 hp)Traktorenlexikon, “Zetor 7711”Not comparableNot comparable on power at the PTO shaft: the 7830 (DT) TL-20 N/F (TL-20 DT/F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7711/7745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the 7711/7745.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the 7711/7745.
Which pumps more oil for implements?38.7 L/min (10.2 gpm)Traktorenlexikon, “Landini 7830 (DT)”36.9 L/min (9.7 gpm)Traktorenlexikon, “Zetor 7711”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?3,050 kg (6,724 lb)Traktorenlexikon, “Landini 7830 (DT)”2,447 kg (5,395 lb)Traktorenlexikon, “Zetor 7711”AheadThe Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has 25% more lift (603 kg / 1,329 lb) than the ZETOR 7711/7745 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,715 kg (5,986 lb)Traktorenlexikon, “Landini 7830 (DT)”3,103 kg (6,841 lb)Traktorenlexikon, “Zetor 7711”Ahead (a fact, not an advantage)The ZETOR 7711/7745 is 14% heavier (388 kg / 855 lb) than the Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the 7711/7745.
Which has the wider choice of gears?12Traktorenlexikon, “Landini 7830 (DT)”10 to 20Traktorenlexikon, “Zetor 7711”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the 7711/7745.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini 7830 (DT)”25 km/h (15.5 mph)Traktorenlexikon, “Zetor 7711”AheadThe Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 7711/7745 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini 7830 (DT)”540/1000 rpmTraktorenlexikon, “Zetor 7711”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Zetor 7711”No figureNo call on PTO independence: not stated for the 7830 (DT) TL-20 N/F (TL-20 DT/F).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Landini 7830 (DT)”Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 7711”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1983–19871985–1993EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has 25% more lift (603 kg / 1,329 lb) than the ZETOR 7711/7745 (both lift at the hitch ends, as stated by the source).
  • The ZETOR 7711/7745 is 14% heavier (388 kg / 855 lb) than the Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) (both unladen weight, as stated by the source).
  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 7711/7745 (both top speed forward, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 7830 (DT) TL-20 N/F (TL-20 DT/F) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7711/7745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources