Landini 7800-Turbo (DT) or SAME Panther 90 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Landini 7800-Turbo (DT): hydraulic flow. It is also ahead on forward gears and top speed.

  • The Landini 7800-Turbo (DT) suits loader and hydraulic implement work better on this data: 61% (19.3 L/min / 5.1 gpm) more hydraulic flow.
  • The Landini 7800-Turbo (DT) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 7800-Turbo (DT) and SAME Panther 90 (DT), with the call on each
Question7800-Turbo (DT)Panther 90 (DT)Call
Which puts more power through the PTO shaft?55.3 kW (74.2 hp)Traktorenlexikon, “Landini 7800 DT Turbo”55.8 kW (74.8 hp)Traktorenlexikon, “SAME Panther 90”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7800-Turbo (DT) and the Panther 90 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7800-Turbo (DT) and the Panther 90 (DT).
Which pumps more oil for implements?51.0 L/min (13.5 gpm)Traktorenlexikon, “Landini 7800 DT Turbo”31.7 L/min (8.4 gpm)Traktorenlexikon, “SAME Panther 90”AheadThe Landini 7800-Turbo (DT) has 61% more hydraulic flow (19.3 L/min / 5.1 gpm) than the SAME Panther 90 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,540 kg (7,804 lb)Traktorenlexikon, “Landini 7800 DT Turbo”3,440 kg (7,584 lb)Traktorenlexikon, “SAME Panther 90”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,815 kg (8,411 lb)Traktorenlexikon, “Landini 7800 DT Turbo”3,700 kg (8,157 lb)Traktorenlexikon, “SAME Panther 90”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 7800-Turbo (DT) and the Panther 90 (DT).
Which has the wider choice of gears?32Traktorenlexikon, “Landini 7800 DT Turbo”12 to 24Traktorenlexikon, “SAME Panther 90”AheadThe Landini 7800-Turbo (DT) has 33% more forward gears (8 gears) than the SAME Panther 90 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7800-Turbo (DT) and the Panther 90 (DT).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT Turbo”25 km/h (15.5 mph)Traktorenlexikon, “SAME Panther 90”AheadThe Landini 7800-Turbo (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME Panther 90 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini 7800 DT Turbo”540/1000 rpmTraktorenlexikon, “SAME Panther 90”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini 7800 DT Turbo”independentTraktorenlexikon, “SAME Panther 90”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Landini 7800 DT Turbo”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Panther 90”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–20001978–1980Ahead (a fact, not an advantage)The Landini 7800-Turbo (DT) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7800-Turbo (DT) has 61% more hydraulic flow (19.3 L/min / 5.1 gpm) than the SAME Panther 90 (DT) (both pump flow, as stated by the source).
  • The Landini 7800-Turbo (DT) has 33% more forward gears (8 gears) than the SAME Panther 90 (DT) (both forward gears, as stated by the source).
  • The Landini 7800-Turbo (DT) has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME Panther 90 (DT) (both top speed forward, as stated by the source).
  • The Landini 7800-Turbo (DT) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources