Landini 7800-Turbo (DT) vs SAME Panther 90 (DT)

9 material differences · fewer than 12

Tractor one

1987–2000

No measured PTO figure

Tractor two

1978–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 7800-Turbo (DT) and the Panther 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Landini 7800-Turbo (DT) and SAME Panther 90 (DT), field by field
Field	7800-Turbo (DT)	Panther 90 (DT)	Gap
Engine
Engine power, claimed claimed	82.9 hp	88.8 hp	+7% Panther 90 (DT)
Engine declared	Perkins LT 4.236	SAME DA 985 P	differs
Displacement declared	3.86 L	4.52 L	+17% Panther 90 (DT)
Maximum torque declared	237 lb·ft · 322 N·m	207 lb·ft · 280 N·m	+15% 7800-Turbo (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 7800-Turbo (DT)
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated dry Borg & Beck single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	13.5 gpm · 51.0 L/min	8.4 gpm · 31.7 L/min	+61% 7800-Turbo (DT)
Pressure declared	2,901 psi · 200 bar	—	—
Three-point lift at ends declared	7,804 lb · 3,540 kg	7,584 lb · 3,440 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,411 lb · 3,815 kg	8,157 lb · 3,700 kg	—
Wheelbase declared	93.3 in · 2,371 mm	98.4 in · 2,499 mm	+5% Panther 90 (DT)
Length declared	157.1 in · 3,990 mm	—	—
Width declared	81.5 in · 2,070 mm	83.1 in · 2,112 mm	—
Height declared	108.7 in · 2,760 mm	110.2 in · 2,800 mm	—
Ground clearance declared	13.1 in · 332 mm	19.7 in · 500 mm	+51% Panther 90 (DT)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	156.4 qt · 148.0 L	101.4 qt · 96.0 L	+54% 7800-Turbo (DT)

Source

Source