Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) vs Steyr 8070 (a)

9 material differences · fewer than 12

Tractor one

1993–2000

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 6060 (DT) TL-39 N/K (TL-39 DT/K) and the 8070 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) and Steyr 8070 (a), field by field
Field	6060 (DT) TL-39 N/K (TL-39 DT/K)	8070 (a)	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	Perkins AT 3.152-4	Steyr WD-411.42 or WD-411.41	differs
Displacement declared	2.50 L	3.46 L	+38% 8070 (a)
Maximum torque declared	155 lb·ft · 210 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–24.9 mph · 25–40 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch or LuK double clutch	—
Hydraulics & hitch
Pump flow declared	9.9 gpm · 37.6 L/min	—	—
Pressure declared	2,756 psi · 190 bar	3,553 psi · 245 bar	+29% 8070 (a)
Three-point lift at ends declared	4,427 lb · 2,008 kg	5,732 lb · 2,600 kg	+29% 8070 (a)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,291 lb · 2,400 kg	5,703 lb · 2,587 kg	+8% 8070 (a)
Maximum permissible mass declared	—	8,818 lb · 4,000 kg	—
Wheelbase declared	83.7 in · 2,126 mm	84.8 in · 2,155 mm	—
Length declared	139.4 in · 3,540 mm	146.3 in · 3,716 mm	—
Width declared	75.8 in · 1,925 mm	67.3 in · 1,710 mm	+13% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Height declared	93.3 in · 2,370 mm	95.1 in · 2,416 mm	—
Ground clearance declared	19.3 in · 490 mm	14.8 in · 375 mm	+31% 6060 (DT) TL-39 N/K (TL-39 DT/K)
Turning radius, braked declared	11.7 ft · 3.57 m	11.4 ft · 3.48 m	—
Fuel tank declared	90.9 qt · 86.0 L	101.4 qt · 96.0 L	+12% 8070 (a)

Source

Source