13 material differences

Tractor oneLandini 6030 (DT) TL-39 N/B (TL-39 DT/B)1983–1987No measured PTO figureTractor twoRenault 80 S/F1976–1984No measured PTO figure

Which should you choose?

Read our verdict on the 6030 (DT) TL-39 N/B (TL-39 DT/B) and the 80 S/F → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) and Renault 80 S/F, field by field
Field6030 (DT) TL-39 N/B (TL-39 DT/B)80 S/FGap
Engine
Engine power, claimed claimed55.3 hp55.3 hp—
Engine declaredPerkins AT 3.152-4MWM D 327-3differs
Displacement declared2.50 L2.83 L+13% 80 S/F
Maximum torque declared131 lb·ft · 178 N·m126 lb·ft · 171 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Clutch declaredDry and air-cooled OMG or LuK double clutchDry LuK double clutchdiffers
Hydraulics & hitch
Pump flow declared9.6 gpm · 36.5 L/min7.1 gpm · 26.8 L/min+36% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Pressure declared2,901 psi · 200 bar——
Three-point lift, at the coupling points declared4,429 lb · 2,009 kg5,820 lb · 2,640 kg+31% 80 S/F
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared4,971 lb · 2,255 kg3,516 lb · 1,595 kg+41% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Wheelbase declared81.9 in · 2,080 mm73.5 in · 1,868 mm+11% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Length declared138.2 in · 3,510 mm133.8 in · 3,398 mm—
Width declared75.6 in · 1,920 mm48.0–66.0 in · 1,220–1,677 mmdiffers
Ground clearance declared19.5 in · 495 mm15.4 in · 390 mm+27% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Turning radius, braked declared12.4 ft · 3.79 m8.7 ft · 2.66 m+42% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Fuel tank declared63.9 qt · 60.5 L54.9 qt · 52.0 L+16% 6030 (DT) TL-39 N/B (TL-39 DT/B)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) sources

Source
  • Source: Traktorenlexikon, “Landini 6030 (DT)”
  • Source: Traktorenlexikon, “Massey Ferguson MF 253”

Renault 80 S/F sources

Source
  • Source: Traktorenlexikon, “Renault 80S R7386”
  • Source: Traktorenlexikon, “Renault 461 R7441”