10 material differences · fewer than 12
Tractor oneLandini 6030 (DT) TL-39 N/B (TL-39 DT/B)1983–1987No measured PTO figureTractor twoMassey Ferguson MF 5601976–1979No measured PTO figure
Which should you choose?
Read our verdict on the 6030 (DT) TL-39 N/B (TL-39 DT/B) and the MF 560 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6030 (DT) TL-39 N/B (TL-39 DT/B) | MF 560 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | Perkins AT 3.152-4 | Perkins AD 4.203 | differs |
| Displacement declared | 2.50 L | 3.34 L | +33% MF 560 |
| Maximum torque declared | 131 lb·ft · 178 N·m | 164 lb·ft · 223 N·m | +25% MF 560 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Clutch declared | Dry and air-cooled OMG or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.5 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Three-point lift, at the coupling points declared | 4,429 lb · 2,009 kg | 3,968 lb · 1,800 kg | +12% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,971 lb · 2,255 kg | 6,107 lb · 2,770 kg | +23% MF 560 |
| Wheelbase declared | 81.9 in · 2,080 mm | 85.8 in · 2,180 mm | — |
| Length declared | 138.2 in · 3,510 mm | 146.9 in · 3,730 mm | +6% MF 560 |
| Width declared | 75.6 in · 1,920 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 15.0 in · 380 mm | +30% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Turning radius, braked declared | 12.4 ft · 3.79 m | 11.2 ft · 3.40 m | +11% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Fuel tank declared | 63.9 qt · 60.5 L | 63.4 qt · 60.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) sources
- Source: Traktorenlexikon, “Landini 6030 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”
Massey Ferguson MF 560 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 560”
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”