9 material differences · fewer than 12
Tractor oneLandini 5860 (DT) TL-22 N/K (TL-22 DT/K)1988–2000No measured PTO figureTractor twoZETOR 5211/52451984–1993No measured PTO figure
Which should you choose?
Read our verdict on the 5860 (DT) TL-22 N/K (TL-22 DT/K) and the 5211/5245 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 5860 (DT) TL-22 N/K (TL-22 DT/K) | 5211/5245 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 46.4 hp | 46.4 hp | — |
| Engine declared | Perkins AD 3.152 S | ZBROJORKA Z-5201 | differs |
| Displacement declared | 2.50 L | 2.70 L | +8% 5211/5245 |
| Maximum torque declared | 124 lb·ft · 168 N·m | 108 lb·ft · 146 N·m | +15% 5860 (DT) TL-22 N/K (TL-22 DT/K) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 5860 (DT) TL-22 N/K (TL-22 DT/K) |
| Clutch declared | Dry and air-cooled LuK double clutch | dry double clutch, pedal-operated driving clutch and hand lever-operated PTO clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.0 gpm · 37.9 L/min | 15.6 gpm · 59.0 L/min | +56% 5211/5245 |
| Pressure declared | 2,756 psi · 190 bar | 1,160 psi · 80 bar | +138% 5860 (DT) TL-22 N/K (TL-22 DT/K) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,960 lb · 2,250 kg | 6,283 lb · 2,850 kg | +27% 5211/5245 |
| Wheelbase declared | 83.7 in · 2,126 mm | 83.6 in · 2,123 mm | — |
| Length declared | 139.4 in · 3,540 mm | 142.5 in · 3,620 mm | — |
| Width declared | 71.5 in · 1,815 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | 17.1 in · 435 mm | 16.3 in · 415 mm | — |
| Turning radius, braked declared | 11.3 ft · 3.44 m | 10.9 ft · 3.32 m | — |
| Fuel tank declared | 90.9 qt · 86.0 L | 58.1 qt · 55.0 L | +56% 5860 (DT) TL-22 N/K (TL-22 DT/K) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 5860 (DT) TL-22 N/K (TL-22 DT/K) sources
- Source: Traktorenlexikon, “Landini 5860”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”
ZETOR 5211/5245 sources
- Source: Traktorenlexikon, “Zetor 5211”