Landini 5830 (DT) TL-22 N/G (TL-DT/L) vs Massey Ferguson MF 4215 (A)

9 material differences · fewer than 12

Tractor one

1983–1987

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 5830 (DT) TL-22 N/G (TL-DT/L) and the MF 4215 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Landini 5830 (DT) TL-22 N/G (TL-DT/L) and Massey Ferguson MF 4215 (A), field by field
Field	5830 (DT) TL-22 N/G (TL-DT/L)	MF 4215 (A)	Gap
Engine
Engine power, claimed claimed	49.3 hp	51.4 hp	—
Engine declared	Perkins AD 3.152 S	Perkins 903.27	differs
Displacement declared	2.50 L	2.70 L	+8% MF 4215 (A)
Maximum torque declared	133 lb·ft · 181 N·m	136 lb·ft · 184 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry, air-cooled OMG double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	9.5 gpm · 36.1 L/min	—	—
Pressure declared	—	2,031 psi · 140 bar	—
Three-point lift at ends declared	4,519 lb · 2,050 kg	4,718 lb · 2,140 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,674 lb · 2,120 kg	5,258 lb · 2,385 kg	+13% MF 4215 (A)
Wheelbase declared	81.9 in · 2,080 mm	83.9 in · 2,130 mm	—
Length declared	140.7 in · 3,575 mm	149.0 in · 3,785 mm	+6% MF 4215 (A)
Width declared	69.1 in · 1,755 mm	78.0 in · 1,982 mm	+13% MF 4215 (A)
Height declared	89.6 in · 2,275 mm	99.0 in · 2,515 mm	+11% MF 4215 (A)
Ground clearance declared	17.1 in · 435 mm	8.3 in · 210 mm	+107% 5830 (DT) TL-22 N/G (TL-DT/L)
Turning radius, braked declared	12.4 ft · 3.79 m	—	—
Fuel tank declared	63.9 qt · 60.5 L	90.9 qt · 86.0 L	+42% MF 4215 (A)

Source

Source