11 material differences · fewer than 12
Tractor oneLandini R-5500 (DT) "TL 22 N/A"1973–1983No measured PTO figureTractor twoNew Holland 3935 (A)1969–1999No measured PTO figure
Which should you choose?
Read our verdict on the R-5500 (DT) "TL 22 N/A" and the 3935 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | R-5500 (DT) "TL 22 N/A" | 3935 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | Perkins AD 3.152 S | IVECO 8035.06 | differs |
| Displacement declared | 2.50 L | 2.71 L | +8% 3935 (A) |
| Maximum torque declared | 128 lb·ft · 173 N·m | 114 lb·ft · 155 N·m | +12% R-5500 (DT) "TL 22 N/A" |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 7.6 gpm · 28.6 L/min | 8.7 gpm · 32.8 L/min | +15% 3935 (A) |
| Three-point lift, at the coupling points declared | 4,519 lb · 2,050 kg | 3,461 lb · 1,570 kg | +31% R-5500 (DT) "TL 22 N/A" |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,431 lb · 2,010 kg | 4,255 lb · 1,930 kg | — |
| Maximum permissible mass declared | — | 8,488 lb · 3,850 kg | — |
| Wheelbase declared | 81.9 in · 2,080 mm | 78.7 in · 1,999 mm | — |
| Length declared | 138.6 in · 3,520 mm | 127.6 in · 3,241 mm | +9% R-5500 (DT) "TL 22 N/A" |
| Width declared | 69.3–89.0 in · 1,760–2,260 mm | 60.6–84.3 in · 1,540–2,140 mm | differs |
| Ground clearance declared | 16.5 in · 420 mm | 14.8 in · 375 mm | +12% R-5500 (DT) "TL 22 N/A" |
| Turning radius, braked declared | 10.9 ft · 3.31 m | 9.9 ft · 3.03 m | +9% R-5500 (DT) "TL 22 N/A" |
| Fuel tank declared | 64.5 qt · 61.0 L | 44.4 qt · 42.0 L | +45% R-5500 (DT) "TL 22 N/A" |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-5500 (DT) "TL 22 N/A" sources
- Source: Traktorenlexikon, “Landini 5500”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”
New Holland 3935 (A) sources
- Source: Traktorenlexikon, “New Holland 3935”
- Source: Traktorenlexikon, “New Holland 3435”