Landini 10800 (DT) vs Massey Ferguson MF 3080 (A)

9 material differences · fewer than 12

Tractor one

1987–2000

No measured PTO figure

Tractor two

1989–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 10800 (DT) and the MF 3080 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 9 fields identical or within 5%, which is not counted as material

Landini 10800 (DT) and Massey Ferguson MF 3080 (A), field by field
Field	10800 (DT)	MF 3080 (A)	Gap
Engine
Engine power, claimed claimed	95.7 hp	95.7 hp	—
Engine declared	PERKINS TW 6.354-4	Perkins A 6.354-4 TW	differs
Displacement declared	5.80 L	5.80 L	—
Maximum torque declared	245 lb·ft · 332 N·m	266 lb·ft · 361 N·m	+9% MF 3080 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated dry single-disc clutch	pedal-operated dry air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	13.5 gpm · 51.2 L/min	13.5 gpm · 51.2 L/min	—
Pressure declared	2,901 psi · 200 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	9,921 lb · 4,500 kg	8,397 lb · 3,809 kg	+18% 10800 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,480 lb · 4,300 kg	11,398 lb · 5,170 kg	+20% MF 3080 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	15,432 lb · 7,000 kg	—
Wheelbase declared	106.1 in · 2,696 mm	106.1 in · 2,696 mm	—
Length declared	175.2 in · 4,450 mm	170.2 in · 4,323 mm	—
Width declared	83.9 in · 2,130 mm	73.3 in · 1,861 mm	+14% 10800 (DT)
Height declared	108.7 in · 2,760 mm	108.2 in · 2,749 mm	—
Ground clearance declared	16.1 in · 410 mm	17.0 in · 432 mm	+5% MF 3080 (A)
Fuel tank declared	200.8 qt · 190.0 L	200.8 qt · 190.0 L	—

Source

Source