Landini 10800 (DT) vs Massey Ferguson MF 4255 (A)

13 material differences

Tractor one

1987–2000

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 10800 (DT) and the MF 4255 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Landini 10800 (DT) and Massey Ferguson MF 4255 (A), field by field
Field	10800 (DT)	MF 4255 (A)	Gap
Engine
Engine power, claimed claimed	95.7 hp	93.7 hp	—
Engine declared	PERKINS TW 6.354-4	Perkins 1004-4 THR2	differs
Displacement declared	5.80 L	3.99 L	+45% 10800 (DT)
Maximum torque declared	245 lb·ft · 332 N·m	248 lb·ft · 336 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated dry single-disc clutch	Pedal-operated, dry and air-cooled single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	13.5 gpm · 51.2 L/min	17.2 gpm · 65.0 L/min	+27% MF 4255 (A)
Pressure declared	2,901 psi · 200 bar	3,104–3,481 psi · 214–240 bar	differs
Three-point lift at ends declared	9,921 lb · 4,500 kg	7,937 lb · 3,600 kg	+25% 10800 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,480 lb · 4,300 kg	8,135 lb · 3,690 kg	+17% 10800 (DT)
Maximum permissible mass declared	15,432 lb · 7,000 kg	15,432 lb · 7,000 kg	—
Wheelbase declared	106.1 in · 2,696 mm	92.5 in · 2,350 mm	+15% 10800 (DT)
Length declared	175.2 in · 4,450 mm	157.9 in · 4,010 mm	+11% 10800 (DT)
Width declared	83.9 in · 2,130 mm	78.3 in · 1,990 mm	+7% 10800 (DT)
Height declared	108.7 in · 2,760 mm	102.8 in · 2,610 mm	+6% 10800 (DT)
Ground clearance declared	16.1 in · 410 mm	11.4 in · 290 mm	+41% 10800 (DT)
Fuel tank declared	200.8 qt · 190.0 L	196.5 qt · 186.0 L	—

Source

Source