11 material differences · fewer than 12
Tractor oneLamborghini R-704 (DT)1976–1982No measured PTO figureTractor twoVALMET 605/605-41983–1989No measured PTO figure
Which should you choose?
Read our verdict on the R-704 (DT) and the 605/605-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-704 (DT) | 605/605-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71.1 hp | — |
| Engine declared | LAMBORGHINI FL-1104/1 | VALMET TD 33 DS 6 | differs |
| Displacement declared | 4.56 L | 3.30 L | +38% R-704 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 605/605-4 |
| Clutch declared | Dry LuK double clutch | Pedal operated dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.4 gpm · 24.2 L/min | 13.9 gpm · 52.7 L/min | +118% 605/605-4 |
| Pressure declared | 2,418 psi · 167 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,975 lb · 2,710 kg | 7,584 lb · 3,440 kg | +27% 605/605-4 |
| Wheelbase declared | 89.8 in · 2,280 mm | 93.2 in · 2,368 mm | — |
| Length declared | 131.9 in · 3,350 mm | 168.9 in · 4,290 mm | +28% 605/605-4 |
| Width declared | 68.5–96.1 in · 1,740–2,440 mm | 80.3–99.6 in · 2,040–2,530 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 17.1 in · 435 mm | +6% R-704 (DT) |
| Fuel tank declared | 63.4 qt · 60.0 L | 190.2 qt · 180.0 L | +200% 605/605-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-704 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 704 DT”
VALMET 605/605-4 sources
- Source: Traktorenlexikon, “Valmet 605”