Lamborghini R-475 (DT) vs Steyr 280a
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the R-475 (DT) and the 280a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-475 (DT) | 280a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 73.0 hp | 67 hp | +9% R-475 (DT) |
| Engine declared | LAMBORGHINI FL-1104 | Steyr WD-413 | differs |
| Displacement declared | 4.16 L | 5.32 L | +28% 280a |
| Maximum torque declared | 190 lb·ft · 258 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry Walterscheid double clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.4 gpm · 24.2 L/min | — | — |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Three-point lift at ends declared | 6,027 lb · 2,734 kg | 4,409 lb · 2,000 kg | +37% R-475 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 575 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,045 lb · 2,742 kg | 6,900 lb · 3,130 kg | +14% 280a |
| Wheelbase declared | 89.0 in · 2,260 mm | 86.8 in · 2,205 mm | — |
| Length declared | 149.2 in · 3,790 mm | 139.8 in · 3,550 mm | +7% R-475 (DT) |
| Width declared | 66.1 in · 1,680 mm | 76.2 in · 1,936 mm | +15% 280a |
| Height declared | 63.0 in · 1,600 mm | 85.4 in · 2,170 mm | +36% 280a |
| Ground clearance declared | — | 17.4 in · 442 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 12.5 ft · 3.80 m | +6% 280a |
| Fuel tank declared | 68.7 qt · 65.0 L | 105.7 qt · 100 L | +54% 280a |
Lamborghini R-475 (DT) sources
Source
- Source: Traktorenlexikon, “Lamborghini R 475 (DT)”
- Source: Traktorenlexikon, “Lamborghini R 470 (DT)”
Steyr 280a sources
Source
- Source: Traktorenlexikon, “Steyr 280a”