Lamborghini Premium 850 (DT) vs Renault Ceres 345
12 material differences
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both; the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Premium 850 (DT) | Ceres 345 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 79.0 hp | — |
| Drawbar power, measured measured | — | 70.3 hp | — |
| Engine | |||
| Engine power, claimed claimed | 83.8 hp | — | — |
| Engine declared | SAME H-1000.4 WT-3 | John Deere 4045 TRT 50 | differs |
| Displacement declared | 4.00 L | 4.53 L | +13% Ceres 345 |
| Maximum torque declared | 216 lb·ft · 293 N·m | 244 lb·ft · 330.3 N·m | +13% Ceres 345 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry single-disc clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Constant flow | differs |
| Pump flow declared | 10.8 gpm · 41.0 L/min | 13.5 gpm · 51.1 L/min | +25% Ceres 345 |
| Three-point lift at ends declared | 7,937 lb · 3,600 kg | 11,486 lb · 5,210 kg | +45% Ceres 345 |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,003 lb · 3,630 kg | 8,113–8,543 lb · 3,680–3,875 kg | differs |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | 12,919 lb · 5,860 kg | — |
| Wheelbase declared | 93.5 in · 2,375 mm | 95.8–97.2 in · 2,433–2,470 mm | — |
| Length declared | 149.0 in · 3,785 mm | 176.4 in · 4,481 mm | +18% Ceres 345 |
| Width declared | 72.4 in · 1,840 mm | 73.2 in · 1,860 mm | — |
| Height declared | 105.3 in · 2,675 mm | 101.8 in · 2,586 mm | — |
| Ground clearance declared | 20.3 in · 515 mm | 16.5–19.3 in · 420–490 mm | differs |
| Turning radius, braked declared | — | 12.5–13.3 ft · 3.80–4.05 m | — |
| Fuel tank declared | 158.5 qt · 150.0 L | 158.5 qt · 150.0 L | — |
Lamborghini Premium 850 (DT) sources
Source
- Source: Traktorenlexikon, “Lamborghini Premium 850 DT A”
Renault Ceres 345 sources
Source
- Source: OECD test report 1977, 2002
- Source: OECD test report 1970, 2001
- Source: Traktorenlexikon, “Renault Ceres 345”
- Source: Traktorenlexikon, “Renault Ceres 345X”