Lamborghini 450 DT vs SAME 45 DT

3 material differences · fewer than 12

Tractor one

1992–2003

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 450 DT and the 45 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

3 material differences · 14 fields identical or within 5%, which is not counted as material

Lamborghini 450 DT and SAME 45 DT, field by field
Field	450 DT	45 DT	Gap
Engine
Engine power, claimed claimed	44.4 hp	41.4 hp	+7% 450 DT
Engine declared	MITSUBISHI K 4 F-DT	MITSUBISHI K 4 F-DT	—
Displacement declared	1.49 L	1.49 L	—
Maximum torque declared	74 lb·ft · 100.2 N·m	74 lb·ft · 100.2 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	1.9 gpm · 7.1 L/min	7.9 gpm · 30.0 L/min	+323% 45 DT
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	2,646 lb · 1,200 kg	2,646 lb · 1,200 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	2,535–2,690 lb · 1,150–1,220 kg	2,227 lb · 1,010 kg	differs
Maximum permissible mass declared	5,291 lb · 2,400 kg	5,291 lb · 2,400 kg	—
Wheelbase declared	66.9 in · 1,700 mm	66.9 in · 1,700 mm	—
Length declared	119.3 in · 3,030 mm	119.3 in · 3,030 mm	—
Width declared	49.6 in · 1,260 mm	49.4 in · 1,255 mm	—
Height declared	79.9 in · 2,030 mm	84.8 in · 2,155 mm	+6% 45 DT
Ground clearance declared	15.0 in · 380 mm	15.0 in · 380 mm	—
Turning radius, braked declared	10.8 ft · 3.30 m	10.8 ft · 3.30 m	—
Fuel tank declared	30.6 qt · 29.0 L	30.6 qt · 29.0 L	—

Source

Source