3 material differences · fewer than 12

Tractor oneLamborghini 250 DT1992–2003No measured PTO figureTractor twoSAME 25 DT1992–2004No measured PTO figure

Which should you choose?

Read our verdict on the 250 DT and the 25 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

3 material differences · 16 fields identical or within 5%, which is not counted as material

Lamborghini 250 DT and SAME 25 DT, field by field
Field	250 DT	25 DT	Gap
Engine
Engine power, claimed claimed	24.7 hp	24.7 hp	—
Engine declared	MITSUBISHI K3 F-D	MITSUBISHI K3 F-D	—
Displacement declared	1.12 L	1.12 L	—
Maximum torque declared	44 lb·ft · 59.8 N·m	44 lb·ft · 59.8 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Pedal operated dry single disc clutch	Pedal operated dry single plate driving clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	2.2 gpm · 8.3 L/min	5.8 gpm · 22.0 L/min	+165% 25 DT
Pressure declared	1,305 psi · 90 bar	2,973 psi · 205 bar	+128% 25 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	2,138 lb · 970 kg	2,216 lb · 1,005 kg	—
Maximum permissible mass declared	4,630 lb · 2,100 kg	4,630 lb · 2,100 kg	—
Wheelbase declared	60.6 in · 1,540 mm	60.6 in · 1,540 mm	—
Length declared	105.9 in · 2,690 mm	105.9 in · 2,690 mm	—
Width declared	44.1–50.4 in · 1,120–1,280 mm	44.1–50.4 in · 1,120–1,280 mm	—
Height, over the roll bar declared	77.2 in · 1,960 mm	77.2 in · 1,960 mm	—
Ground clearance declared	11.4 in · 290 mm	11.4 in · 290 mm	—
Turning radius, braked declared	8.5 ft · 2.60 m	8.5 ft · 2.60 m	—
Fuel tank declared	30.6 qt · 29.0 L	30.6 qt · 29.0 L	—

Source

Source