Lamborghini 950 DT vs New Holland 8160

15 material differences

Tractor one

1995–2004

No measured PTO figure

Tractor two

1996–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 950 DT and the 8160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

Lamborghini 950 DT and New Holland 8160, field by field
Field	950 DT	8160	Gap
Engine
Engine power, claimed claimed	93.6 hp	98.6 hp	+5% 8160
Engine declared	SAME H-1000.4 WT-2	NEW HOLLAND 675-TC	differs
Displacement declared	4.00 L	7.48 L	+87% 8160
Maximum torque declared	243 lb·ft · 329 N·m	297 lb·ft · 403 N·m	+22% 8160
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. single-plate clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	16.1 gpm · 61.0 L/min	26.3 gpm · 99.6 L/min	+63% 8160
Pressure declared	3,046 psi · 210 bar	2,408–2,582 psi · 166–178 bar	differs
Three-point lift at ends declared	7,937 lb · 3,600 kg	10,803 lb · 4,900 kg	+36% 8160
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	11,574 lb · 5,250 kg	+23% 8160
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% 8160
Wheelbase declared	93.4 in · 2,373 mm	107.2 in · 2,723 mm	+15% 8160
Length declared	149.0 in · 3,785 mm	179.5 in · 4,560 mm	+20% 8160
Width declared	72.4 in · 1,840 mm	92.5 in · 2,350 mm	+28% 8160
Height declared	106.1 in · 2,695 mm	110.2 in · 2,800 mm	—
Ground clearance declared	17.5 in · 445 mm	14.2 in · 360 mm	+24% 950 DT
Turning radius, braked declared	13.4 ft · 4.07 m	—	—
Fuel tank declared	158.5 qt · 150.0 L	232.5 qt · 220.0 L	+47% 8160

Source

Source