Lamborghini R-956 (DT) vs VALMET 6300-4

10 material differences · fewer than 12

Tractor one

1983–1996

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the R-956 (DT) and the 6300-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini R-956 (DT) and VALMET 6300-4, field by field
Field	R-956 (DT)	6300-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	83.8 hp	+12% R-956 (DT)
Engine declared	SAME 916.6 W	VALMET 420 DS/420 DSRE/44 DT	differs
Displacement declared	5.50 L	4.40 L	+25% R-956 (DT)
Maximum torque declared	245 lb·ft · 332 N·m	—	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry LAMBORGHINI single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	16.6 gpm · 63.0 L/min	18.4 gpm · 69.5 L/min	+10% 6300-4
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	10,141 lb · 4,600 kg	9,601 lb · 4,355 kg	+6% R-956 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,466 lb · 3,840 kg	8,973 lb · 4,070 kg	+6% 6300-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	103.0 in · 2,617 mm	91.7 in · 2,330 mm	+12% R-956 (DT)
Length declared	151.0 in · 3,836 mm	174.2 in · 4,425 mm	+15% 6300-4
Width declared	77.0 in · 1,957 mm	79.1 in · 2,010 mm	—
Height declared	104.4 in · 2,652 mm	106.9 in · 2,715 mm	—
Ground clearance declared	20.9 in · 532 mm	17.1 in · 435 mm	+22% R-956 (DT)
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	137.4 qt · 130.0 L	167.0 qt · 158.0 L	+22% 6300-4

Source

Source