Lamborghini 564-60 (DT) vs VALMET 4300

11 material differences · fewer than 12

Tractor one

1993–2004

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 564-60 (DT) and the 4300 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Lamborghini 564-60 (DT) and VALMET 4300, field by field
Field	564-60 (DT)	4300	Gap
Engine
Engine power, claimed claimed	59.1 hp	60.2 hp	—
Engine declared	SAME 1000.3 A-4	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 4300
Maximum torque declared	136 lb·ft · 185 N·m	162 lb·ft · 220 N·m	+19% 4300
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated dry Lamborghini single-disc clutch	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	10.3 gpm · 39.0 L/min	+8% 4300
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	4,542 lb · 2,060 kg	6,151 lb · 2,790 kg	+35% 4300
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	82.9 in · 2,105 mm	83.1 in · 2,112 mm	—
Length declared	127.6 in · 3,240 mm	149.2 in · 3,790 mm	+17% 4300
Width declared	70.1 in · 1,780 mm	80.0 in · 2,032 mm	+14% 4300
Height declared	89.6 in · 2,275 mm	94.1 in · 2,390 mm	—
Ground clearance declared	17.3 in · 440 mm	18.1 in · 460 mm	—
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	61.3 qt · 58.0 L	100.4 qt · 95.0 L	+64% 4300

Source

Source