Lamborghini 564-60 (DT) vs VALMET 365 (365-4)

13 material differences

Tractor one

1993–2004

No measured PTO figure

Tractor two

1994–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 564-60 (DT) and the 365 (365-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini 564-60 (DT) and VALMET 365 (365-4), field by field
Field	564-60 (DT)	365 (365-4)	Gap
Engine
Engine power, claimed claimed	59.1 hp	60.2 hp	—
Engine declared	SAME 1000.3 A-4	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 365 (365-4)
Maximum torque declared	136 lb·ft · 185 N·m	162 lb·ft · 220 N·m	+19% 365 (365-4)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry Lamborghini single-disc clutch	Dry FICHTEL & SACHS double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	14.5 gpm · 55.0 L/min	+53% 365 (365-4)
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	5,688 lb · 2,580 kg	+12% 564-60 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	4,542 lb · 2,060 kg	6,217 lb · 2,820 kg	+37% 365 (365-4)
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	82.9 in · 2,105 mm	83.1 in · 2,112 mm	—
Length declared	127.6 in · 3,240 mm	146.1 in · 3,710 mm	+15% 365 (365-4)
Width declared	70.1 in · 1,780 mm	79.9 in · 2,030 mm	+14% 365 (365-4)
Height declared	89.6 in · 2,275 mm	103.5 in · 2,630 mm	+16% 365 (365-4)
Ground clearance declared	17.3 in · 440 mm	15.9 in · 405 mm	+9% 564-60 (DT)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	61.3 qt · 58.0 L	77.1 qt · 73.0 L	+26% 365 (365-4)

Source

Source