13 material differences

Tractor oneLamborghini 774-80 DT1986–1990No measured PTO figureTractor twoLandini 8560 L (DT) TL 40 N/M (TL-40 DT/M)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the 774-80 DT and the 8560 L (DT) TL 40 N/M (TL-40 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini 774-80 DT and Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M), field by field
Field774-80 DT8560 L (DT) TL 40 N/M (TL-40 DT/M)Gap
Engine
Engine power, claimed claimed78.9 hp78.9 hp—
Engine declaredSAME 1000.4 W 1Perkins A 4.248differs
Displacement declared4.00 L4.07 L—
Maximum torque declared193 lb·ft · 261 N·m208 lb·ft · 282 N·m+8% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredPedal-operated dry Lamborghini single-plate clutchDry and air-cooled OMG double clutchdiffers
Hydraulics & hitch
Pump flow declared9.5 gpm · 35.8 L/min11.2 gpm · 42.3 L/min+18% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Pressure declared—2,756 psi · 190 bar—
Three-point lift, at the coupling points declared5,964 lb · 2,705 kg4,630 lb · 2,100 kg+29% 774-80 DT
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared5,997 lb · 2,720 kg5,027 lb · 2,280 kg+19% 774-80 DT
Wheelbase declared92.9 in · 2,360 mm81.5 in · 2,070 mm+14% 774-80 DT
Length declared142.1 in · 3,610 mm140.6 in · 3,570 mm—
Width declared82.3–90.2 in · 2,090–2,290 mm61.4–89.4 in · 1,560–2,270 mmdiffers
Ground clearance declared19.3 in · 490 mm16.5 in · 420 mm+17% 774-80 DT
Turning radius, braked declared9.6 ft · 2.94 m10.9 ft · 3.33 m+13% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Fuel tank declared89.8 qt · 85.0 L65.5 qt · 62.0 L+37% 774-80 DT

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lamborghini 774-80 DT sources

Source
  • Source: Traktorenlexikon, “Lamborghini 774-80 DT”
  • Source: Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”

Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) sources

Source
  • Source: Traktorenlexikon, “Landini R 8560 L (DT)”
  • Source: Traktorenlexikon, “Massey Ferguson MF 178”