10 material differences · fewer than 12
Tractor oneLamborghini R-654 (DT)1977–1982No measured PTO figureTractor twoMassey Ferguson MF 1771965–1968No measured PTO figure
Which should you choose?
Read our verdict on the R-654 (DT) and the MF 177 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R-654 (DT) | MF 177 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 66.1 hp | — |
| Engine declared | SAME 984-P | Perkins A 4.236 | differs |
| Displacement declared | 3.62 L | 3.87 L | +7% MF 177 |
| Maximum torque declared | 181 lb·ft · 245 N·m | 193 lb·ft · 262 N·m | +7% MF 177 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4 mph · 20 km/h | +25% R-654 (DT) |
| Clutch declared | Dry VALEO double clutch, type 11 inches | pedal-operated dry double clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | — | 3,001 psi · 207 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,732 lb · 2,600 kg | 6,151 lb · 2,790 kg | +7% MF 177 |
| Wheelbase declared | 89.1 in · 2,264 mm | 84.0 in · 2,134 mm | +6% R-654 (DT) |
| Length declared | 143.7 in · 3,650 mm | 139.4 in · 3,540 mm | — |
| Width declared | 66.1–93.7 in · 1,680–2,380 mm | 75.2 in · 1,910 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 17.3 in · 440 mm | — |
| Turning radius, braked declared | — | 11.7 ft · 3.57 m | — |
| Fuel tank declared | 68.7 qt · 65.0 L | 86.6 qt · 82.0 L | +26% MF 177 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-654 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 654 DT”
Massey Ferguson MF 177 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 177”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”