Lamborghini R 483 (DT) or SOMECA 480 Special (TD)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R 483 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 480 Special (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Lamborghini R 483 (DT) suits loader and hydraulic implement work better on this data: 15% (3.2 L/min / 0.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R 483 (DT) and SOMECA 480 Special (TD), with the call on each
QuestionR 483 (DT)480 Special (TD)Call
Which puts more power through the PTO shaft?35.3 kW (47.3 hp)Traktorenlexikon, “Lamborghini 483 DT”35.3 kW (47.3 hp)Traktorenlexikon, “Someca 480 S”Not comparableNot comparable on power at the PTO shaft: the R 483 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 480 Special (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the R 483 (DT) and the 480 Special (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the R 483 (DT) and the 480 Special (TD).
Which pumps more oil for implements?25.0 L/min (6.6 gpm)Traktorenlexikon, “Lamborghini 483 DT”21.8 L/min (5.8 gpm)Traktorenlexikon, “Someca 480 S”AheadThe Lamborghini R 483 (DT) has 15% more hydraulic flow (3.2 L/min / 0.8 gpm) than the SOMECA 480 Special (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,550 kg (3,417 lb)Traktorenlexikon, “Someca 480 S”No figureNo call on three-point lift: no figure on record for the R 483 (DT).
Which is heavier, for traction?1,960 kg (4,321 lb)Traktorenlexikon, “Lamborghini 483 DT”1,900 kg (4,189 lb)Traktorenlexikon, “Someca 480 S”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the R 483 (DT) and the 480 Special (TD).
Which has the wider choice of gears?12Traktorenlexikon, “Lamborghini 483 DT”8 to 12Traktorenlexikon, “Someca 480 S”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the R 483 (DT) and the 480 Special (TD).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 483 DT”25 km/h (15.5 mph)Traktorenlexikon, “Someca 480 S”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Lamborghini 483 DT”540 rpmTraktorenlexikon, “Someca 480 S”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini 483 DT”independentTraktorenlexikon, “Someca 480 S”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 483 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 480 S”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1982–19851977–1979Ahead (a fact, not an advantage)The Lamborghini R 483 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Lamborghini R 483 (DT) has 15% more hydraulic flow (3.2 L/min / 0.8 gpm) than the SOMECA 480 Special (TD) (both pump flow, as stated by the source).
  • The Lamborghini R 483 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the R 483 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 480 Special (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources