7 material differences · fewer than 12
Tractor oneKramer KB 22 C1951–1954No measured PTO figureTractor twoLanz D 7506 Allzweck1939–1942No measured PTO figure
Which should you choose?
Read our verdict on the KB 22 C and the D 7506 Allzweck → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | KB 22 C | D 7506 Allzweck | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 21 hp | 24.5 hp | +14% D 7506 Allzweck |
| Engine declared | Güldner 2 DA | — | — |
| Displacement declared | 1.63 L | — | — |
| Maximum torque declared | 66 lb·ft · 89 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.0 mph · 17.7 km/h | +13% KB 22 C |
| Clutch declared | Single-plate dry clutch | Pedal operated three-jaw clutch with clutch brake | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | — | — |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 528 rpm | 760 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,579 lb · 1,170 kg | 6,349 lb · 2,880 kg | +146% D 7506 Allzweck |
| Wheelbase declared | 68.1 in · 1,730 mm | 69.1 in · 1,755 mm | — |
| Length declared | 113.0 in · 2,870 mm | 117.3 in · 2,980 mm | — |
| Width declared | 60.6–61.0 in · 1,540–1,550 mm | 65.7 in · 1,670 mm | differs |
| Ground clearance declared | 14.6 in · 370 mm | 18.5 in · 470 mm | +27% D 7506 Allzweck |
| Fuel tank declared | 21.1 qt · 20 L | 52.8 qt · 50 L | +150% D 7506 Allzweck |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Kramer KB 22 C sources
- Source: Traktorenlexikon, “Kramer KB 22 C”
- Source: Traktorenlexikon, “Güldner AF 20”
Lanz D 7506 Allzweck sources
- Source: Traktorenlexikon, “Lanz D 7506 Allzweck”