11 material differences · fewer than 12
Tractor oneKramer 450 Export1964–1967No measured PTO figureTractor twoSOMECA DA-501952–1955No measured PTO figure
Which should you choose?
Read our verdict on the 450 Export and the DA-50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 450 Export | DA-50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.2 hp | 40.5 hp | — |
| Engine declared | Standard-Triumph OE 138 | O.M.-MILANO COD-40 | differs |
| Displacement declared | 2.26 L | 3.77 L | +67% DA-50 |
| Maximum torque declared | 101 lb·ft · 137 N·m | 137 lb·ft · 186 N·m | +36% DA-50 |
| Transmission | |||
| Top speed declared | 12.4–17.4 mph · 20–28 km/h | 13.7 mph · 22 km/h | differs |
| Clutch declared | Double clutch by Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 2.4 gpm · 9.2 L/min | +117% 450 Export |
| Pressure declared | 1,707 psi · 118 bar | — | — |
| Rear PTO speeds declared | 585/1090 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,365 lb · 1,980 kg | 4,586 lb · 2,080 kg | — |
| Maximum permissible mass declared | 5,842 lb · 2,650 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 75.0 in · 1,905 mm | +8% 450 Export |
| Length declared | 130.7 in · 3,320 mm | 116.5 in · 2,960 mm | +12% 450 Export |
| Width declared | 61.0 in · 1,550 mm | 70.1–89.0 in · 1,780–2,260 mm | differs |
| Height, over the steering wheel declared | 64.2 in · 1,630 mm | 73.2 in · 1,860 mm | +14% DA-50 |
| Ground clearance declared | 15.7 in · 400 mm | 15.7 in · 400 mm | — |
| Fuel tank declared | 45.4 qt · 43 L | 59.2 qt · 56.0 L | +30% DA-50 |
Kramer 450 Export sources
Source
- Source: Traktorenlexikon, “Kramer 450 Export”
SOMECA DA-50 sources
Source
- Source: Traktorenlexikon, “Someca DA 50”