John Deere-LANZ 710 vs SOMECA SOM-50

14 material differences

Tractor one

1965–1967

No measured PTO figure

Tractor two

1961–1963

No measured PTO figure

Which should you choose?

Read our verdict on the 710 and the SOM-50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere-LANZ 710 and SOMECA SOM-50, field by field
Field	710	SOM-50	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	John Deere 202 D 23 L	O.M.-FIAT CO 1D/50	differs
Displacement declared	3.32 L	4.16 L	+25% SOM-50
Maximum torque declared	132 lb·ft · 178 N·m	177 lb·ft · 240 N·m	+35% SOM-50
Transmission
Top speed declared	12.4–15.5 mph · 20–25 km/h	14.3 mph · 23 km/h	differs
Clutch declared	—	Pedal operated two stage dry FERODO double clutch	—
Hydraulics & hitch
Pump flow declared	4.1 gpm · 15.6 L/min	5.3 gpm · 20.0 L/min	+28% SOM-50
Pressure declared	2,162 psi · 149 bar	—	—
Three-point lift at ends declared	3,968 lb · 1,800 kg	2,094 lb · 950 kg	+89% 710
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,925 lb · 2,234 kg	5,071 lb · 2,300 kg	—
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	86.6 in · 2,200 mm	74.8 in · 1,900 mm	+16% 710
Length declared	139.0 in · 3,530 mm	125.2 in · 3,180 mm	+11% 710
Width declared	70.5 in · 1,790 mm	60.4 in · 1,535 mm	+17% 710
Height declared	68.9 in · 1,750 mm	74.6 in · 1,895 mm	+8% SOM-50
Ground clearance declared	19.7 in · 500 mm	23.1 in · 587 mm	+17% SOM-50
Turning radius, braked declared	10.2 ft · 3.10 m	10.8 ft · 3.30 m	+6% SOM-50
Fuel tank declared	74.0 qt · 70.0 L	53.9 qt · 51.0 L	+37% 710

Source

Source