John Deere-LANZ 700 vs New Holland 3935 (A)

7 material differences · fewer than 12

Tractor one

John Deere-LANZ 700

1963–1965

No measured PTO figure

Tractor two

New Holland 3935 (A)

1969–1999

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (2WD; 2WD / 4WD); they were not built in overlapping years (1963–1965; 1969–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere-LANZ 700 and New Holland 3935 (A), field by field
Field7003935 (A)Gap
Engine
Engine power, claimed claimed49.3 hp49.3 hp
Engine declaredJohn Deere 405IVECO 8035.06differs
Displacement declared2.71 L2.71 L
Maximum torque declared125 lb·ft · 170 N·m114 lb·ft · 155 N·m+10% 700
Transmission
Top speed declared12.4–18.6 mph · 20–30 km/h15.5–18.6 mph · 25–30 km/hdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Pump flow declared8.7 gpm · 32.8 L/min
Three-point lift at ends declared3,461 lb · 1,570 kg
Rear PTO speeds declared540/1000 rpm540/1000 rpm
Weight & dimensions
Unladen weight declared5,071 lb · 2,300 kg4,255 lb · 1,930 kg+19% 700
Maximum permissible mass declared7,716 lb · 3,500 kg8,488 lb · 3,850 kg+10% 3935 (A)
Wheelbase declared76.8 in · 1,950 mm78.7 in · 1,999 mm
Length declared133.5 in · 3,390 mm127.6 in · 3,241 mm
Width declared65.0 in · 1,650 mm60.6 in · 1,540 mm+7% 700
Height declared62.4 in · 1,585 mm89.4 in · 2,270 mm+43% 3935 (A)
Ground clearance declared15.2 in · 385 mm14.8 in · 375 mm
Turning radius, braked declared9.9 ft · 3.03 m
Fuel tank declared44.4 qt · 42.0 L

John Deere-LANZ 700 sources

Source
  • Source: Traktorenlexikon, “John Deere-Lanz 700”

New Holland 3935 (A) sources

Source
  • Source: Traktorenlexikon, “New Holland 3935”
  • Source: Traktorenlexikon, “New Holland 3435”