John Deere-LANZ 700 vs John Deere R
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (46%); they were not built in overlapping years (1963–1965; 1949–1954). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 700 | R | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 48.7 hp | — |
| Engine declared | John Deere 405 | John Deere R-1358 | differs |
| Displacement declared | 2.71 L | 6.81 L | +152% R |
| Maximum torque declared | 125 lb·ft · 170 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 11.2 mph · 18 km/h | differs |
| Clutch declared | — | Hand lever operated dry JOHN DEERE double plate clutch | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540/1000 rpm | 536 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 7,401 lb · 3,357 kg | +46% R |
| Maximum permissible mass declared | 7,716 lb · 3,500 kg | — | — |
| Wheelbase declared | 76.8 in · 1,950 mm | 85.1 in · 2,162 mm | +11% R |
| Length declared | 133.5 in · 3,390 mm | 147.0 in · 3,734 mm | +10% R |
| Width declared | 65.0 in · 1,650 mm | 79.5 in · 2,019 mm | +22% R |
| Height declared | 62.4 in · 1,585 mm | 78.1 in · 1,984 mm | +25% R |
| Ground clearance declared | 15.2 in · 385 mm | — | — |
| Fuel tank declared | — | 88.0 qt · 83.3 L | — |
John Deere-LANZ 700 sources
Source
- Source: Traktorenlexikon, “John Deere-Lanz 700”
John Deere R sources
Source
- Source: Traktorenlexikon, “John Deere Modell R”