John Deere 930 vs Leyland 245

10 material differences · fewer than 12

Tractor one

1974–1977

No measured PTO figure

Tractor two

1973–1975

No measured PTO figure

Which should you choose?

Read our verdict on the 930 and the 245 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 930 and Leyland 245, field by field
Field	930	245	Gap
Engine
Engine power, claimed claimed	40.5 hp	46.8 hp	+16% 245
Engine declared	John Deere 3.164 DL 15	Perkins D 3152	differs
Displacement declared	2.70 L	2.50 L	+8% 930
Maximum torque declared	107 lb·ft · 145 N·m	128 lb·ft · 173 N·m	+19% 245
Transmission
Top speed declared	16.8–18.6 mph · 27–30 km/h	16.2 mph · 26 km/h	differs
Clutch declared	Pedal operated, two-stage dry Fichtel & Sachs double clutch	Dry Borg & Beck double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	6.7 gpm · 25.4 L/min	8.0 gpm · 30.2 L/min	+19% 245
Pressure declared	3,481–4,496 psi · 240–310 bar	—	—
Three-point lift at ends declared	3,490 lb · 1,583 kg	3,748 lb · 1,700 kg	+7% 245
Rear PTO speeds declared	—	540 rpm	—
Weight & dimensions
Unladen weight declared	4,817 lb · 2,185 kg	5,236 lb · 2,375 kg	+9% 245
Maximum permissible mass declared	7,055 lb · 3,200 kg	—	—
Wheelbase declared	74.4 in · 1,890 mm	74.4 in · 1,890 mm	—
Length declared	136.2 in · 3,460 mm	126.0 in · 3,200 mm	+8% 930
Width declared	66.5 in · 1,690 mm	63.8 in · 1,621 mm	—
Height declared	89.8 in · 2,280 mm	90.6 in · 2,301 mm	—
Ground clearance declared	12.8 in · 325 mm	15.7 in · 399 mm	+23% 245
Turning radius, braked declared	9.6 ft · 2.92 m	10.1 ft · 3.07 m	—
Fuel tank declared	66.0 qt · 62.5 L	—	—

Source

Source