John Deere 8210 T vs John Deere 8220 T
4 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because the 8210 T is on tracks, not an alternative to an ordinary tractor; the 8220 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | 8210 T | 8220 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 212.1 hp | 222.1 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-14 | John Deere-PowerTech 6.081 HRW-21 | differs |
| Displacement declared | 8.13 L | 8.13 L | — |
| Maximum torque declared | 662 lb·ft · 898 N·m | 707 lb·ft · 958 N·m | +7% 8220 T |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated, hydraulic-wet John Deere multi-plate clutch | Pedal operated hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 34.7 gpm · 131.4 L/min | 34.6 gpm · 131.0 L/min | — |
| Pressure declared | 3,379 psi · 233 bar | 3,379 psi · 233 bar | — |
| Three-point lift at ends declared | — | 15,212 lb · 6,900 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 25,399 lb · 11,521 kg | 25,507 lb · 11,570 kg | — |
| Maximum permissible mass declared | 31,500 lb · 14,288 kg | 31,500 lb · 14,288 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 89.0 in · 2,260 mm | — |
| Length declared | 216.0 in · 5,487 mm | 217.7 in · 5,530 mm | — |
| Width declared | 134.0 in · 3,404 mm | 103.7 in · 2,634 mm | +29% 8210 T |
| Height declared | 123.4 in · 3,135 mm | 122.9 in · 3,122 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 13.8 in · 350 mm | — |
| Fuel tank declared | 519.9 qt · 492.0 L | 519.9 qt · 492.0 L | — |
John Deere 8210 T sources
Source
- Source: Traktorenlexikon, “John Deere 8210T”
- Source: OECD test report 1934, 2000
John Deere 8220 T sources
Source
- Source: Traktorenlexikon, “John Deere 8220T”
- Source: Traktorenlexikon, “John Deere 8120T”