10 material differences · fewer than 12
Tractor oneJohn Deere 8200 T1997–1998No measured PTO figureTractor twoNew Holland TG 210 (Traktorenlexikon)2002–2005No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (25%); the drive differs (Tracks; 4WD); they were not built in overlapping years (1997–1998; 2002–2005); the 8200 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 8200 T | TG 210 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207.3 hp | 207.2 hp | — |
| Engine declared | John Deere-PowerTech 6.081 HRW-03 | CUMMINS 6 TAA-830 | differs |
| Displacement declared | 8.13 L | 8.27 L | — |
| Maximum torque declared | 659 lb·ft · 893 N·m | 679 lb·ft · 921 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% TG 210 |
| Clutch declared | Pedal-operated, hydraulic-wet John Deere multi-disc clutch | Electro-hydraulically operated wet Case-IH multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 31.1 gpm · 117.7 L/min | 38.6 gpm · 146.1 L/min | +24% TG 210 |
| Pressure declared | 3,379 psi · 233 bar | 3,031 psi · 209 bar | +11% 8200 T |
| Three-point lift, at the coupling points declared | 15,763 lb · 7,150 kg | 9,458 lb · 4,290 kg | +67% 8200 T |
| Rear PTO speeds declared | 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 25,589 lb · 11,607 kg | 20,466 lb · 9,283 kg | +25% 8200 T |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 121.2 in · 3,078 mm | +36% TG 210 |
| Length declared | 216.0 in · 5,487 mm | 227.4 in · 5,775 mm | — |
| Width declared | 102.0–109.3 in · 2,591–2,775 mm | 120.0–150.0 in · 3,048–3,810 mm | differs |
| Height, over the cab declared | 123.4 in · 3,135 mm | 125.0 in · 3,175 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 13.8 in · 350 mm | — |
| Fuel tank declared | 519.9 qt · 492.0 L | 519.9 qt · 492.0 L | — |
John Deere 8200 T sources
Source
- Source: Traktorenlexikon, “John Deere 8200T”
- Source: OECD test report 1781, 1998
New Holland TG 210 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland TG 210”
- Source: Traktorenlexikon, “Case-IH MX210”