John Deere 7930 vs Steyr-Case 9250 a

10 material differences · fewer than 12

Tractor one

2007–2011

No measured PTO figure

Tractor two

1997–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 7930 and the 9250 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 7930 and Steyr-Case 9250 a, field by field
Field	7930	9250 a	Gap
Engine
Engine power, claimed claimed	217.1 hp	235.9 hp	+9% 9250 a
Engine declared	John Deere PowrTech-Plus 6.068 HRW-65/V4-CR	CASE-IH 6TA-830	differs
Displacement declared	6.78 L	8.27 L	+22% 9250 a
Maximum torque declared	653 lb·ft · 885 N·m	771 lb·ft · 1,045 N·m	+18% 9250 a
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated hydraulic wet multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	32.0 gpm · 121.1 L/min	29.7 gpm · 112.4 L/min	+8% 7930
Three-point lift at ends declared	15,543 lb · 7,050 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,730 lb · 8,042 kg	18,170 lb · 8,242 kg	—
Maximum permissible mass declared	28,881 lb · 13,100 kg	25,519 lb · 11,575 kg	+13% 7930
Wheelbase declared	112.6 in · 2,860 mm	118.3 in · 3,006 mm	—
Length declared	212.4 in · 5,394 mm	200.4 in · 5,090 mm	+6% 7930
Width declared	86.9 in · 2,208 mm	120.0 in · 3,048 mm	+38% 9250 a
Height declared	120.9 in · 3,072 mm	121.1 in · 3,077 mm	—
Ground clearance declared	27.2 in · 690 mm	19.3 in · 489 mm	+41% 7930
Fuel tank declared	378.3–414.2 qt · 358.0–392.0 L	379.4 qt · 359.0 L	differs

Source

Source