John Deere 7800 (A) vs WHITE 170

8 material differences · fewer than 12

Tractor one

1992–1997

No measured PTO figure

Tractor two

1990–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 7800 (A) and the 170 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 7800 (A) and WHITE 170, field by field
Field	7800 (A)	170	Gap
Engine
Engine power, claimed claimed	167.8 hp	165.8 hp	—
Engine declared	John Deere 6.076 TRW-30	CUMMINS CT 6-830	differs
Displacement declared	7.63 L	8.28 L	+9% 170
Maximum torque declared	528 lb·ft · 716 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	28.8 gpm · 108.9 L/min	—	—
Pressure declared	2,538 psi · 175 bar	—	—
Three-point lift at ends declared	12,478 lb · 5,660 kg	7,965 lb · 3,613 kg	+57% 7800 (A)
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	14,528 lb · 6,590 kg	13,300 lb · 6,033 kg	+9% 7800 (A)
Maximum permissible mass declared	25,353 lb · 11,500 kg	—	—
Wheelbase declared	110.2 in · 2,800 mm	112.0 in · 2,845 mm	—
Length declared	189.0 in · 4,800 mm	180.0 in · 4,572 mm	—
Width declared	98.4 in · 2,500 mm	96.0 in · 2,438 mm	—
Height declared	121.3 in · 3,080 mm	120.0 in · 3,048 mm	—
Ground clearance declared	24.7 in · 628 mm	23.0 in · 584 mm	+8% 7800 (A)
Turning radius, braked declared	—	13.0 ft · 3.96 m	—
Fuel tank declared	363.5 qt · 344.0 L	295.9 qt · 280.0 L	+23% 7800 (A)

Source

Source