John Deere 7510 vs Massey Ferguson MF 3630

9 material differences · fewer than 12

Tractor one

1999–2002

115.1 hp

Measured at the PTO · OECD Test 1959

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 7510 and the MF 3630 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 7510 and Massey Ferguson MF 3630, field by field
Field	7510	MF 3630	Gap
Measured performance
PTO power, measured measured	115.1 hp	—	—
Drawbar power, measured measured	106.1 hp	—	—
Engine
Engine power, claimed claimed	—	131.3 hp	—
Engine declared	John Deere 6.068 TRW-70	Perkins AT 6.354.4	differs
Displacement declared	6.79 L	5.80 L	+17% 7510
Maximum torque declared	395 lb·ft · 535.0 N·m	330 lb·ft · 447 N·m	+20% 7510
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	26.7 gpm · 101.1 L/min	—	—
Pressure declared	2,538 psi · 175 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	—	13,536 lb · 6,140 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,928–13,289 lb · 5,864–6,028 kg	11,916 lb · 5,405 kg	differs
Wheelbase declared	103.3–111.8 in · 2,625–2,840 mm	109.3 in · 2,777 mm	differs
Length declared	174.6 in · 4,435 mm	183.0 in · 4,649 mm	—
Width declared	110.6 in · 2,808 mm	82.2 in · 2,088 mm	+34% 7510
Height declared	113.4 in · 2,880 mm	114.4 in · 2,905 mm	—
Ground clearance declared	14.2–15.7 in · 360–400 mm	16.9 in · 428 mm	differs
Fuel tank declared	199.7 qt · 189.0 L	274.7 qt · 260.0 L	+38% MF 3630

Source

Source