John Deere 7400 (A) vs WHITE 120

8 material differences · fewer than 12

Tractor one

1993–1997

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 7400 (A) and the 120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 7400 (A) and WHITE 120, field by field
Field	7400 (A)	120	Gap
Engine
Engine power, claimed claimed	118.4 hp	118 hp	—
Engine declared	John Deere 6.068 TRW-02	CUMMINS BT 6-590	differs
Displacement declared	6.79 L	5.89 L	+15% 7400 (A)
Maximum torque declared	350 lb·ft · 474 N·m	350 lb·ft · 474 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	25.9 gpm · 98.0 L/min	22.0 gpm · 83.3 L/min	+18% 7400 (A)
Pressure declared	2,538 psi · 175 bar	—	—
Three-point lift at ends declared	—	7,335 lb · 3,327 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,663 lb · 5,744 kg	12,152 lb · 5,512 kg	—
Maximum permissible mass declared	19,842 lb · 9,000 kg	—	—
Wheelbase declared	103.3 in · 2,625 mm	111.5 in · 2,832 mm	+8% 120
Length declared	174.6 in · 4,435 mm	174.0 in · 4,420 mm	—
Width declared	110.6 in · 2,808 mm	96.0 in · 2,438 mm	+15% 7400 (A)
Height declared	113.4 in · 2,880 mm	117.2 in · 2,978 mm	—
Ground clearance declared	14.2 in · 360 mm	26.3 in · 667 mm	+85% 120
Turning radius, braked declared	—	12.2 ft · 3.71 m	—
Fuel tank declared	215.6 qt · 204.0 L	100.4–132.1 qt · 95.0–125.0 L	differs

Source

Source