John Deere 7400 (A) vs SAME Rubin 120

10 material differences · fewer than 12

Tractor one

1993–1997

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 7400 (A) and the Rubin 120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 7400 (A) and SAME Rubin 120, field by field
Field	7400 (A)	Rubin 120	Gap
Engine
Engine power, claimed claimed	118.4 hp	118.4 hp	—
Engine declared	John Deere 6.068 TRW-02	SAME-DEUTZ-FAHR 1000.6 WT-3 V	differs
Displacement declared	6.79 L	6.00 L	+13% 7400 (A)
Maximum torque declared	350 lb·ft · 474 N·m	367 lb·ft · 498 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Hydraulically operated, wet SAME-DEUTZ-FAHR multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	25.9 gpm · 98.0 L/min	—	—
Pressure declared	2,538 psi · 175 bar	2,176 psi · 150 bar	+17% 7400 (A)
Three-point lift at ends declared	—	18,960 lb · 8,600 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,663 lb · 5,744 kg	13,448 lb · 6,100 kg	+6% Rubin 120
Maximum permissible mass declared	19,842 lb · 9,000 kg	23,149 lb · 10,500 kg	+17% Rubin 120
Wheelbase declared	103.3 in · 2,625 mm	108.3 in · 2,750 mm	—
Length declared	174.6 in · 4,435 mm	183.9 in · 4,670 mm	+5% Rubin 120
Width declared	110.6 in · 2,808 mm	96.5 in · 2,450 mm	+15% 7400 (A)
Height declared	113.4 in · 2,880 mm	113.4 in · 2,880 mm	—
Ground clearance declared	14.2 in · 360 mm	20.5 in · 520 mm	+44% Rubin 120
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	215.6 qt · 204.0 L	401.5 qt · 380.0 L	+86% Rubin 120

Source

Source