John Deere 6920 vs Lamborghini R.1506 DT

9 material differences · fewer than 12

Tractor one

2002–2007

No measured PTO figure

Tractor two

from 2004

No measured PTO figure

Which should you choose?

Read our verdict on the 6920 and the R.1506 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

John Deere 6920 and Lamborghini R.1506 DT, field by field
Field	6920	R.1506 DT	Gap
Engine
Engine power, claimed claimed	148.0 hp	147.9 hp	—
Engine declared	John Deere PowrTech 6.068 HLA-072/V2 or 6.068 HLA-73/4V HP	SAME 1000.6 WTI 10 (Tier-II)	differs
Displacement declared	6.79 L	6.00 L	+13% 6920
Maximum torque declared	474 lb·ft · 642.0 N·m	395 lb·ft · 536 N·m	+20% 6920
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated, hydraulic wet Perma clutch II as multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	—	17.5 gpm · 66.2 L/min	—
Pressure declared	3,017–3,220 psi · 208–222 bar	3,118 psi · 215 bar	—
Three-point lift at ends declared	18,894 lb · 8,570 kg	14,727 lb · 6,680 kg	+28% 6920
Rear PTO speeds declared	540E/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	14,528–14,639 lb · 6,590–6,640 kg	12,555 lb · 5,695 kg	differs
Maximum permissible mass declared	23,612 lb · 10,710 kg	—	—
Wheelbase declared	104.3 in · 2,650 mm	108.3 in · 2,750 mm	—
Length declared	211.8 in · 5,380 mm	175.2 in · 4,450 mm	+21% 6920
Width declared	95.7 in · 2,430 mm	92.9 in · 2,360 mm	—
Height declared	114.8 in · 2,915 mm	111.0 in · 2,820 mm	—
Ground clearance declared	16.9 in · 430 mm	21.7 in · 550 mm	+28% R.1506 DT
Fuel tank declared	264.2 qt · 250.0 L	253.6 qt · 240.0 L	—

Source

Source