John Deere 6910 vs VALMET 8350

12 material differences

Tractor one

1997–2003

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 6910 and the 8350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 6910 and VALMET 8350, field by field
Field	6910	8350	Gap
Engine
Engine power, claimed claimed	133.3 hp	133.2 hp	—
Engine declared	John Deere POWER-TECH 6.068 TLA 52	VALMET 620 DSRIE	differs
Displacement declared	6.79 L	6.59 L	—
Maximum torque declared	423 lb·ft · 573 N·m	471 lb·ft · 639 N·m	+12% 8350
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated, hydraulic wet Perma-Clutch II designed as a multi-plate clutch	pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	20.2 gpm · 76.4 L/min	—
Pressure declared	435–3,002 psi · 30–207 bar	3,046 psi · 210 bar	differs
Three-point lift at ends declared	16,973 lb · 7,699 kg	14,991 lb · 6,800 kg	+13% 6910
Rear PTO speeds declared	540E/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,503 lb · 6,125 kg	14,308 lb · 6,490 kg	+6% 8350
Maximum permissible mass declared	22,046 lb · 10,000 kg	19,842 lb · 9,000 kg	+11% 6910
Wheelbase declared	104.3 in · 2,650 mm	100.7 in · 2,558 mm	—
Length declared	179.6 in · 4,563 mm	225.2 in · 5,720 mm	+25% 8350
Width declared	96.1 in · 2,440 mm	84.8 in · 2,155 mm	+13% 6910
Height declared	113.7 in · 2,887 mm	111.2 in · 2,825 mm	—
Ground clearance declared	18.9 in · 480 mm	18.1 in · 460 mm	—
Fuel tank declared	264.2 qt · 250.0 L	174.4 qt · 165.0 L	+52% 6910

Source

Source